DA-15 PRO 5 INCH DUAL ACTION POLISHER MACHINE | 15MM ORBIT · 1000W
- 15 mmOrbit
- 5″Backing plate
- 1000 WMotor
- 2,000–5,800OPM variable
- 1 YearWarranty
Couldn't load pickup availability
Specifications & legal info
| Generic name | Dual Action Polisher |
|---|---|
| M.R.P. | ₹ 28,124.00 (incl. of all taxes) |
| SKU | DA-15 PRO |
| Country of origin | China |
| Manufacturer | Wyko International Private Limited 16, Gudaipur, Focal Point, Udyog Nagar, Jalandhar, Punjab, India - 144004 |
| Packer / Importer | Wyko International Pvt Ltd 16, Gudaipur, Focal Point, Udyog Nagar, Jalandhar, Punjab, India - 144004 |
| Date of mfg. / packing | Month & Year of Import: 09/2026 |
| Consumer care | Wyko International Private Limited 16, Gudaipur, Focal Point, Udyog Nagar, Jalandhar, Punjab, India - 144004 1800-274-0076 · support@wavex.in |

Wavex Auto Care · Pro Elite Series
Wavex Pro Elite 15 mm dual action polisher
The DA-15 PRO / XT90 is the 5 inch dual action polisher at the top of the Wavex Auto Care line-up, built for paint correction, polishing and waxing. A 15 mm orbit on a factory-fitted 5" backing plate, driven by a 1000 W motor with 2,000–5,800 OPM variable speed, soft start and electronic speed control.
- 15 mmOrbit
- 1000 WRated power
- 2,000–5,800OPM variable speed
- 5"Backing plate, factory fitted
- 1 YearLimited warranty
Engineered for correction
Built for pro correction
From the first cutting pass to the final coat of wax.
-
15 mm orbit
Dual action movement with a 15 mm orbit on a factory-fitted 5" backing plate, for safe, controlled correction across panels.
-
1000 W motor
Rated 1000 W on 220–240 V, 50–60 Hz, for cutting swirl marks, oxidation and paint defects.
-
2,000–5,800 OPM variable speed
Set the speed on the variable speed dial to match the task, from cutting to waxing.
-
Soft start & electronic speed control
Starts smoothly and is fitted with electronic speed control.
-
Trigger lock button
Locks the trigger on for long passes without holding it down.
-
5" backing plate, factory fitted
Ready out of the box. Pair it with a 5" pad of about 20 g.
Spec sheet
Technical specifications
- Model
- DA-15 PRO / XT90
- Machine type
- Dual action polisher
- Orbit
- 15 mm
- Backing plate
- 5", factory fitted
- Rated power
- 1000 W
- Voltage / frequency
- 220–240 V, 50–60 Hz
- Speed (OPM)
- 2,000–5,800
- Speed control
- Electronic, variable speed dial
- Soft start
- Yes
- Trigger lock
- Yes
- Cord length
- 4–8 m
- Net weight
- 2.7 kg (without cable)
- Recommended pad
- 5" pad, about 20 g
- Warranty
- 1-year limited warranty

What's in the box
- 1 xDA-15 PRO / XT90 Dual Action Polisher Machine (5" backing plate factory fitted)
- 1 setSpare carbon brushes (2 pcs)
- 1 xAllen wrench (for the backing plate bolt)
- 1 xUser manual and warranty certificate
Speed setting guide
Dial in the right speed
Set the variable speed dial within 2,000–5,800 OPM to match the task.
How to use
Set up. Switch on. Correct.
01Set-up & backing plate
Check that your power supply is 220–240 V, 50–60 Hz.
The 5" backing plate comes factory fitted. Before each use, check the Allen bolt is tight using the supplied Allen wrench.
To fit a new backing plate: unplug the machine, rest it on its back, align the plate hub with the output shaft and line up the squared edges, insert the Allen bolt and thread it in carefully (do not cross-thread), then tighten with the Allen wrench, finishing with a quarter turn.
Centre a 5" pad (about 20 g) on the backing plate.
Tape off trim, badges and edges before you start.
02Operation
Make sure the switch is OFF before plugging in, and remove the Allen key from the machine.
Apply compound or polish to the pad and rest the pad flat on the panel before starting.
Set the speed on the variable speed dial using the speed guide above.
Hold the machine firmly and press the trigger; use the trigger lock button for long passes.
After switching off, the pad keeps spinning briefly; let it stop before lifting or setting the machine down.
The Pro Elite system
DA-15 PRO + XT-Alpha Cut
Start your correction with XT-Alpha Cut on the DA-15 PRO / XT90, then refine with XT-CUT and finish with XT-Gloss.
Use it with
Complete the system
Compounds in order: XT-Alpha Cut, XT-CUT, XT-Gloss, XT-Gloss Plus and One Step. 5" pads to match the machine, and a washer to keep them clean.
Warranty & registration
1-year limited warranty
- Valid for 12 months from the date of purchase.
- The machine's serial number must be on your purchase invoice.
- Register by scanning the QR code on the warranty card, or online at wavex.in/pages/warranty-registration.
- Not covered: consumables (carbon brushes, backing plate, pads) and cord damage. The warranty is void if the machine has been opened.
- To claim, contact support with your invoice and serial number.
Claims: 1800-274-0076 · support@wavex.in · Mon–Sat, 10:00 AM–5:00 PM
Support & care
Care, troubleshooting & safety
Need help? Call toll-free 1800-274-0076 or email support@wavex.in, Mon–Sat, 10:00 AM–5:00 PM.
Maintenance & carbon brush replacement
- Disconnect the power before any maintenance or pad change.
- Clean the motor vents with compressed air after use.
- Keep pads clean; wash them with a pad washer.
- Replace both carbon brushes together, and use original Wavex Auto Care brushes only.
- Do not open the machine body: an opened machine is not covered by the warranty. Contact support for service.
Troubleshooting: machine won't start
- Check the socket supplies 220–240 V, 50–60 Hz and the plug is fully in.
- Check the power cord for cuts or damage; do not use a damaged cord.
- Worn carbon brushes can stop the motor; replace both together with original brushes.
- Still not starting? Contact support at 1800-274-0076 or support@wavex.in. Do not open the machine.
Safety precautions
- Disconnect the power before any maintenance or pad change.
- Wear eye protection and a dust mask.
- Keep the work area clean and well lit; keep children and bystanders away.
- Do not use near flammable liquids, gases or dust.
- Do not expose to rain or wet conditions; use an RCD/GFCI in damp locations.
- Never carry or pull the machine by the cord; keep the cord away from heat, oil and moving parts.
- Switch OFF before plugging in, and remove the Allen key before starting.
- Keep proper footing and do not overreach.
- Rest the pad on the surface before starting; the pad keeps spinning briefly after switch-off.
- Tape off plastic and metal trim before polishing.
Shipping & returns
Orders are typically processed within 1–2 business days after successful payment.
- Free shipping on orders over ₹500.
- Estimated delivery: 3–7 business days, depending on your location and courier serviceability.
- Tracking details are shared after dispatch.
- Returns within 10 days of purchase for unused items in the original packaging, with proof of purchase.
- Sale items are not refundable. Defective or damaged items are replaced; report damage within 7 days of delivery.
Read the shipping policy and refund policy.


